G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » Quick Board » Archives » Ducati/Marchesini wheel help needed « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Firemanjim
Posted on Saturday, November 04, 2006 - 03:06 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I have a set of Marchesini 5 spoke cast wheels--I believe they are from a Ducati,rear is not the SSSA.Anyone with a 900SS,900 monster,or748/996,I need some measurements to be sure.Rotor bolt spacing and axle size on front,and axle size and sprocket bolt spacing on rear.

Marchesini
Top of pagePrevious messageNext messageBottom of page Link to this message

Rocketman
Posted on Saturday, November 04, 2006 - 07:44 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Jim, I have a 916 Marchesini rear in magnesium.

It's hung up in the workshop and if I get a chance later I'll try to get the measurements from it if I can reach up that high!

Because it's magnesium - when it was last repainted gold, and the wrong prep / paint went into it, it has reacted so requires a repaint.

If you need it it's yours.

Rocket
Top of pagePrevious messageNext messageBottom of page Link to this message

Firemanjim
Posted on Saturday, November 04, 2006 - 04:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Sean,I got these for a song ,was looking for a rear for my S-2,have a front already but got a 16.5 rear when I bought those wheels. So these are going up for sale--or trade for a 17" rear 5 spoke Marchesini to fit my S-2. Thanks for the offer though.
Top of pagePrevious messageNext messageBottom of page Link to this message

Rocketman
Posted on Saturday, November 04, 2006 - 09:25 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Jim, the mag Marchesini I have is a 17in rear 5 spoke that fits 748 / 916

I'd be inclined to believe those Marchesini wheels you have are not from a Ducati. I've never heard of a Ducati 16.5in wheel and I can't imagine anyone trying to improve upon the handling of a race Ducati by fitting 16.5in wheels. If they did I'm pretty certain they'd be magnesium anyway. My Ducati tome tells me some 851 Strada's had 16in wheels, but that and 17in wheels are as close as it gets.

This is a long shot. Marchesini made 16.5in cast wheels that looked similar to the one in your pic for GSXR600's. Maybe that's what you have?

Rocket
Top of pagePrevious messageNext messageBottom of page Link to this message

Diablobrian
Posted on Saturday, November 04, 2006 - 11:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

16.5 is common on superbike spec race bikes to take advantage of the 16.5 inch racing slicks.
Top of pagePrevious messageNext messageBottom of page Link to this message

Firemanjim
Posted on Sunday, November 05, 2006 - 02:23 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Sean,you are mixing the wheels I am talking about up---the rear from pair bought for Buell was a 16.5--and impossible to find a non-race tire for.I donated it Vallejo for their former racebike. The Duc ones are 17--they lasted all of 2 hours on eBay.Heading to Aus.
And saw this wheel while cruising eBay just now,it's a 16.5 wheel for the rear of a 916,Sean.
http://cgi.ebay.com/ebaymotors/NEW-Marchesini-Ducati-Rear-Wheel-5-Spoke-Corse-916-Gold_W0QQitemZ280034574057QQihZ018QQcategoryZ35624QQssPageNameZWD1VQQrdZ1QQcmdZViewItem

(Message edited by firemanjim on November 05, 2006)
Top of pagePrevious messageNext messageBottom of page Link to this message

Rocketman
Posted on Sunday, November 05, 2006 - 07:41 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Yes Jim, it appears you caught me talking out of my arse big time.

I can only offer, it was the early hours over here

Rocket
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration