| Author | Message | ||
     Smokinjryan |
I am installing a drag Specialties tach and I Jackbequick has help me a bunch he has stated: The stock tach has (or may have) five wires coming out of the tach housing. Only three of those are connected to anything. I think those wires that are used are as follows but I am not dead certain: orange = light pink = tach signal black = ground Does this look right??????????? My after market drag Specialties tach has 4 wires Green- signal can go to coil red- which is ignition on Blue- Lamp on Black-ground So I should be able to put My blue and red wire together and put to Buell orange connector. #3 My Green coil wire to buell Pink-signal #7 My black to buell Black #9 connector If someone could look this over please let me know if this looks right. Also the correct connectors are amp miltilock socket/pin terminals...So do I need male socket connectors??? Thanks John |
