| Author | Message | ||
     Dsergison |
the remote reservoir has a 2 foot braided hose. where shall I put it. I would love to see a picture of an X1 or m2 with a penske shock please. Thanks, Dan | ||
| Firemanjim |
Dan,put mine on my S-2 on frame tube on left side where it angles down to front. Have bike here at work but no camera,sorry. (Message edited by firemanjim on February 10, 2006) | ||
| Dsergison |
is your shock put on with the hose coming off the front or rear? you attached the reservoir to the tubes near the battery? | ||
| Firemanjim |
Hose to front and it is on the tube heading up alongside the cylinders to the steering head.L/S.Right next to my Banke frame brace. | ||
| Lornce |
Dan, not the best pic but you can see the reservoir below my left knee on (I believe) the same frame rail Firemanjim described. That's a Works Perf, not a Penske, but they both use a similar reservoir plumbed off the front of the shock body.  | ||
| Dsergison |
thanks, I got it mounted last night as you have it pictured, except my resevoir is turned around. I am considering switching out lines and using different elbows someday because it seems the routing is a bit sloppy but I'm just going to ride it for a while first. I appreciate the help. Dan |
