|Posted on Wednesday, January 11, 2017 - 06:03 pm: ||
While I have the front fairing off my XB12 I would like to remove the Daytona Twin Tec tuner.
PO said to always run it at zero and, in this installation, it didn't do much but he was intimidated by the installation and didn't want to screw with removing it.
I am a good technician, do it everyday but I am looking at this and I am intimidated myself, does anyone know how this was installed and how to reverse the process? It appears to be pinned right into the ECM plugs
|Posted on Wednesday, January 11, 2017 - 06:24 pm: ||
OK, kind of a false alarm, it appears the connectors that are on the end of the portion of the stock harness and the twin tec unit are supplied from Twin Tec so I believe I just pull the pins from their connector and put them back into the Buell ECM plugs, there are only five so maybe I can keep that straight,,,, we will see.
Any helpful hints appreciated