|Posted on Sunday, October 02, 2016 - 12:14 pm: ||
This will need some elaboration, as even on the XB's the stators and voltage regulators have changed a few times over the years (two phase, three phase).
But www.cycleelectricinc.com looks like a good US producer of good stators that will fit the basic HD Evolution motor, including the tuber and XB variants. They stock voltage regulators as well.
Cupcake_Mike reported that he used the CE 6014 on his 2006 XB12X with good result.
|Posted on Sunday, October 02, 2016 - 03:17 pm: ||
I'm running one in my M2. It's been good so far. Looks to be top quality. Came with new bolts,exact fit plug and correct length wires. Plug-n-play, just like OEM.
|Posted on Sunday, October 02, 2016 - 04:33 pm: ||
Is the stator that you're using the same part number as the one that Reepicheep referred to?
I'd like to know in case I ever need one.
|Posted on Sunday, October 02, 2016 - 04:58 pm: ||
Photos of box labels
CE-9100A Stator fits 2000-2002 M2 Cyclone for certain.
(Message edited by Jim2 on October 02, 2016)
|Posted on Sunday, October 02, 2016 - 07:13 pm: ||
That makes sense that the tube frame stator is different from the XB stator, and in fact there should be at least two different models for the XB stators.
Thanks for the details Jim!
|Posted on Sunday, October 02, 2016 - 08:49 pm: ||
The CE 6014 even came with new replacement bolts!
I would recommend purchasing through cycleonemanufacturing.com or roadstercycle.com (you can't purchase directly from cycle electric).
Especially since I broke the head off of one of the original bolts during disassembly