G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Neightfrog Posted on Sunday, August 14, 2016 - 09:30 pm:        So my 04 xb12 is leaking oil out of the fitting above the oil filter and under the sending unit switch. I hoped it was the line fitting but it's not its the fitting going into the filter housing. I need to remove that fitting so I can seal the threads but the sendin switch is in the way. What size is that nut on the sending unit? I know I need a special socket. Is it easier to remove the headers or can I do it without removal? Any other advice would be great

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: