G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Blakeaspencer Posted on Friday, October 23, 2015 - 05:32 pm:        My bike (2006 xb12x) has been in the shop for a while now with some problems and it ended up being the clutch. The bearings went bad and proceeded to tear the rest of it up. Now I need a clutch shell, hub, spring,bearing and race, washers and plates. Am I better off buying a whole assembly? If so what are the part numbers? And will a sportster clutch work the same? Thanks for any help   Buellistic Posted on Saturday, October 24, 2015 - 09:23 am:        OLD SCHOOL: Adjust PRIMARY CHAIN to 3/4 inch on chain tight spot and bearing problems will go away !!! PRIMARY CHAIN ADJUSTMENT Class 101, just PM me for a copy ...   Blakeaspencer Posted on Saturday, October 24, 2015 - 12:38 pm:        I got the bike about a 2 months ago with 25,000 miles. It seems to me, the previous owner was not very nice to it. And the harley dealership didn't really know anything about it. But now I need new bearings and clutch pieces and I don't know what to get or where to get them.   Buellistic Posted on Saturday, October 24, 2015 - 01:14 pm:        "HARLEY-DAVIDSON and aftermarket technicians and parts persons making "MECHANICS AND PARTS MEN" out of BUELL Riders" since 1983 !!!"

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: