|Posted on Friday, July 10, 2015 - 03:08 pm: ||
Have a 09 1125CR. I can crank it and it idles fine, I can run it at high rpms and all is fine. But if I'm running high rpms (1500+) for an extended amount of time (30 seconds - 30 minutes) and just let off on the throttle it immediately dies. Makes no difference if I'm doing it in the drive or on the highway, always the same result. Took it to the dealer and they reflashed the ECM and the problem went away (must like my $75) but returned within two weeks. Any suggestions?
|Posted on Friday, November 06, 2015 - 11:32 am: ||
Did you ever find out anything on this issue?
|Posted on Tuesday, November 10, 2015 - 06:44 pm: ||
When riding roll the throttle gently back and forth on the 1500 rpm area.The TPS might have a worn spot.Can the bike start right up after this engine cut off.any codes