G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Stevegula Posted on Thursday, July 17, 2014 - 12:00 pm:        I'm having trouble finding a part number for this and am unsure where to look. I repeatedly find that the XB use an old Mustang part (Duralast) but nothing that confirms that it would work on my X1. It looks identical but that doesn't mean much to me. Appreciate any input.   Xb12r_guy Posted on Friday, December 28, 2018 - 11:21 pm:        This probably comes very late on this post, but here's what I have to offer in this regard for anyone wanting to replace their Oxygen Sensor on an 199-2001 X1. After researching this on this very forum, a fellow Bueller posted some part numbers for various brands. There's Bosch, Denso, Walker, SNG GM and NTK to mention a few. After having idle problems AFV = 149.5% !) I replaced it with a Bosch 12014 from AutoZone/O'Reilly for 21.99. The AFV immediately dropped to 128% and after a TPS reset (I adjusted the AFV to 100% using the ECMDroid dongle on a $30.00 android phone. My X1 sounds and runs awesome! I chose the Bosch brand because it was the one I was sure the connector would fit hands down. The NTK and Denso would fit also but the sensor case did not look physically like the factory one. Hope this helps someone in. the same situation!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: