| Author |
Message |
    
Johnglover
| | Posted on Saturday, February 22, 2014 - 07:57 pm: | 
|
Hi, I've got a 2002 Buell Blast all stock I bought recently. I need to go get in inspected, but I think my blinkers may be a problem.
I'll try and explain it the best I can.
If I flip them one way for either blinker, the blinker and the arrow on my spedo just stay lit solid. If I flip them back to the middle to stop them, all four stay solid, until I click the middle button to shut them off. If I flip them one way, then all the way to the other side, then that side will blink like normal. But then I move it back to the middle and they all four stay solid again. Wtf? I know it sounds messed up enough to buy the whole wiring and assembly and install it, But I wanted to see if anyone has experienced this before and can maybe pinpoint a cheaper option first.
Thanks |
Buell_bert
| | Posted on Sunday, February 23, 2014 - 01:38 pm: |
|
Most likely the turn signal flasher which should be cheap. |
Rsexauer
| | Posted on Tuesday, February 25, 2014 - 10:31 am: |
|
probably a bad bulb on the side that stays on solid. |
Johnglover
| | Posted on Thursday, February 27, 2014 - 08:44 pm: |
|
Today I noticed while I had the seat off, a pretty loud buzzing noise coming from my flasher relay. Went to the Harley store and they said it would be a week until my flasher relay gets shipped there.
Also, today I replaced my tail light bulb(because neither my brake or running light were working). I put it in and now my running light stays on but my brake light (filament) doesn't come on. Anyone have any idea of about how much it would cost to get a mechanic to solve my problems for me, I'm ready to get it on the road!!! |
Johnglover
| | Posted on Thursday, February 27, 2014 - 09:25 pm: |
|
I've also noticed that this post is in the wrong cat. Sorry im new  |
|
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through June 11, 2014 »
Flashers lighting up solid??