G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Cerbero Posted on Wednesday, August 25, 2004 - 10:45 pm:        My stock 97 M2 header is beginning to rust quite badly (thanks to living in San Francisco) so I want to go stainless... I'm seriously considering replacing it with the stock 97 S1 header. I have a V&H SS2R slip-on... the elbow that connects the header and muffler is also rusting... If I go with the S1 header, I will also replace the elbow. My questions: Are the two headers the same (besides the steel they're made with), and are there any problems that I might run into? Thanks! ...c   Captainkirk Posted on Thursday, August 26, 2004 - 12:04 am:        Cerbero, FYI; The race header and muff are some sort of stainless alloy (inconel?)that does not rust. P/N's for your bike are 65396-96YA and 65398-96YB respectively. I see them quite frequently on ebay if your dealer no longer stocks them.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: