| Author |
Message |
    
Xtreme_12
| | Posted on Monday, August 05, 2013 - 06:31 pm: | 
|
I have a 2009 Ulysses XB12X with a check engine light coming on and off intermittent and loosing a bit of power with the high beam dimming.I checked the battery and charging system and it seems to be charging fine.Where is the data plug to try to read the codes on this bike.The fan seems to be running fine as well but have not checked exhaust valve servo yet until I see what the codes are.Do all codes store if the check engine light is not constant on?I am going to change the oil and filter as well as the primary foil and it has a clean K&N air filter but otherwise stock.I am also changing to NGK spark plugs. |
Sambuell
| | Posted on Saturday, August 17, 2013 - 05:50 am: |
|
Hi, I have same issue on my 09 Uly. today started running rough, noticed less power. then speedo stopped working. then engine light came on. I restarted engine and light went off. vibration is still there. I have only had Uly a month so am still researching. I would be interested to hear what u find..good luck sam |
|
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through August 17, 2013 »
How to check codes on a 2009 ULY