G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Troubleshooting (Poor Starting/Running/Handling/Ride Issues) » Archive through August 17, 2013 » Engine stops « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Buddahbuell
Posted on Sunday, August 04, 2013 - 11:13 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

After running for anywhere fron 30 to 60 minutes the engine will stop/cutout for just a few seconds to needs key off and restart. sometimes there is a backfire from the exhaust, that makes me think its not fuel related. Checked the ECM and there are no codes present.
There is a second problem that dose not seem to be related, that is the clock goes to12:00 and the trips reset to "0".
I have checked all the usual suspects like loose cables or bad grounds all seem well???

WTF??
Top of pagePrevious messageNext messageBottom of page Link to this message

Akbuell
Posted on Sunday, August 04, 2013 - 05:13 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I think you are on the right track re grounds. The fact that you have to reset the ign key tells me you are losing electrical power. This is confirmed by the clock and odo resetting.

Given you have a 12X, a careful check of the ECM would be in order. Look for cracks, especially around the connectors.

Hope this helps, Dave
Top of pagePrevious messageNext messageBottom of page Link to this message

Reepicheep
Posted on Tuesday, August 06, 2013 - 11:00 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The cut out followed by a backfire without any trouble codes can point to the crank position sensor, but the "have to reboot the bike" thing sounds like a bank angle sensor.

Or just cracked wires / broken grounds. I had a cracked wire around the steering head, and if you moved the bars it would bring it back sometimes. So I could have lead myself to believe it was rebooting the bike when it was really just moving the bars so I could reach the ignition switch.
Top of pagePrevious messageNext messageBottom of page Link to this message

Harleyelf
Posted on Tuesday, August 06, 2013 - 11:25 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

If your cable grounds and battery connections are all good, your ignition switch itself is suspect. The fact that it waits until it is warm before failing points to it rather than the wiring.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration