G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Sticks Posted on Saturday, July 20, 2013 - 12:54 pm:        What would the compression ratio be when using XB12 pistons in a XB9?   Sticks Posted on Tuesday, July 23, 2013 - 07:22 pm:        I understand that when 9 pistons are used in a 12, you get a 12:1 or so compression ratio, so what about the other way? Maybe a kit intended as a bolt on 1250 kit for a 12 would give you forged pistons and a reasonably low compression ratio in a 9. Is that how it would work or no?   Sticks Posted on Thursday, July 25, 2013 - 11:01 pm:        Talked to Aaron at Hammer and a 1250 kit basically would be a low compression 1050 8.8:1. Flat tops would be 8.5:1. Kinda what I was wondering. Just in case anyone is interested.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: