G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Mbest Posted on Thursday, November 08, 2012 - 03:57 pm:        Hi All, Running an '08 Uly with some engine and exhaust mods. My local shop can't read my later model ecm and doesn't use the ECMSpy or TunerPro because of the "No-Commercial use" clause. I've purchased a plug in cable from Opti, but it looks like there are about a dozen different downloads and related hoops to jump thru to get the ball rolling. I'm sure I'll either do too much or not enough to get this up and running as I jump back and forth between the Opti, ECMSpy and the Tunerpro websites. Sooooooooo....... anyone have a step by step version of just what I need to down load first, second, third etc to help me get started. No problem with paid or "donation" versions of any of the softwares I'll need, just need a check off list so I can get started properly. Running and older hand crank PC with XP. Have the plug in on the bike that looks like an 1/8" audio plug to USB from Opti. Thanks all for looking.. mike

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: