G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Hootowl Posted on Sunday, May 13, 2012 - 07:49 pm:        I suspect mine in bad. The PO, or maybe even the one before that, wired up some kind of crazy bypass with many many vampire clamps. I didn't even try to follow it, I just cut it back to where I had original harness. According to my manual, I've got all the wires connected to where they are supposed to go. I'm thinking the module went south, and that's why it was jury rigged the way it was. By the way, the turn signals didn't work when I got it, so whatever he did, it didn't work very well The part number for the module is obsolete. I found this part number, 68537-89G, and from pictures I've seen of it, other than the color, it looks identical externally, including the mounting hole and the connector. Anyone ever replace one with the other? Here's 68537-89G. http://www.jpcycles.com/product/320-211 I hate to drop a bill and a half on it, since I'm not absolutely certain it is the problem. Especially if it isn't going to work anyway.   Hootowl Posted on Monday, May 21, 2012 - 12:56 pm:        I used one from an S1, and everything works again.   Buellish Posted on Sunday, July 15, 2012 - 10:03 pm:        Jeff, For future reference,the module is still available through Vintage Parts.You have to ask your dealer to run it that way.I bought one early this year.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: