G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Chichflich Posted on Monday, May 07, 2012 - 09:08 pm:        i've got dtc 0001-0629-0628 and 0087. the fuse doesn't blow if i disconnect the 86 fp connector and after multimeter wiggle testing the harness, i figure it must be the pump. this is after its already been dealer replaced but then discovered the ground to battery hadn't been connected properly and hence cut out the ic and front lights when i hit the starter. i've got that back,re-tightening the ground but no fans when i turn the key and a blown fp fuse. is it pretty much the pump for sure or just a wire in the pump? and will i need spyware to re-boot the ecm?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: