G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Austinxb12s Posted on Friday, April 27, 2012 - 10:11 pm:        Sorry for a real noob question but what is the proper procedure for replacing the stock front rotor mounting hardware with the EBR kit (e.g. do you need to remove the caliber and rotor)? If so can someone point me to a thread or video that would help someone with novice mechanical experience? Thanks in advance for the help!   Reepicheep Posted on Saturday, April 28, 2012 - 12:33 am:        Obviously, the axle has to come off, otherwise the old rotor won't come off, and the new rotor won't go on. Take your time and be methodical.   Austinxb12s Posted on Saturday, April 28, 2012 - 11:14 am:        I don't have a new rotor...just new mounting hardware...do I still need to remove the wheel (axle, caliper, rotor, etc.) OR can the hardware just be switched out if there is enough clearance to get the springs out?   Austinxb12s Posted on Saturday, April 28, 2012 - 10:11 pm:        Just replaced rotor hardware one bolt at a time and seemed to totally cure the horrible rattle in my front end after torque to new spec.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: