G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Dtech Posted on Saturday, April 21, 2012 - 09:41 am:        Please help. I just changed the "77" connector for the voltage regulator, I put everything back together again & when I put the key in, switched it to on, the ignition relay started clicking & doesn't stop. I was sure to mark the wires at the connector BUT, if I did happen to switch them, would this be the result? I don't want to switch them back to test it that way until I checked here first. Other then moving the nest of wires at the connections around I didn't do anything else. FOUND IT, FIXED, SORRY I WOULD REMOVE THE POST SO AS NOT TO ANNOY YOU BUT U CAN'T. THANKS. Thank you! (Message edited by Dtech on April 21, 2012)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: