G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Greenlanternjeep Posted on Wednesday, February 29, 2012 - 06:22 pm:        Has anyone done an 1125 engine swap on a uly.I am currently on an 06 uly with around 40k on the ody. It still runs good but starting to hear a little rattle and was thinking of maybe picking up a salvage 1125 to do an engine swap. I dont really know much about the 1125 mounting but I can fab just about anything. Any comments or advice out there?   Froggy Posted on Wednesday, February 29, 2012 - 06:36 pm:        While anything can be done with enough time and money, you will find that you will want to get an 1125R frame and swingarm. They are vastly different from the XB and Uly frame, the R frame even has special indentations in it where the radiators sit near the frame. It is possible to put a Uly tail and flyscreen on a 1125R, that would be easier than stuffing a R motor in a XB or Uly frame.   Buelliedan Posted on Wednesday, March 07, 2012 - 05:15 pm:        As Froggy says it would be better just o buy a complete 1125 and just transfer over the Uly specific parts.   Rdkingryder Posted on Monday, March 12, 2012 - 11:09 pm:        I sort of looked into this. But with a cooling system and the drive on the opposite side and how angled the v is, forget it.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: