G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Coffeerider Posted on Sunday, January 15, 2012 - 11:50 am:        Trying to remove the swingarm from the mounting block. There is a 3/16" Allen bolt on the inner right side of the pivot pin. Does anybody know whether it is right or left hand thread? Do I even need to remove it or do I just tap the pin through with a piece of dowel?   Jramsey Posted on Monday, January 16, 2012 - 07:11 pm:        The 3/16" Allen headed bolt connects the right and left T-bushings (adjustment bolts in FSM)and is used for setting preload on the swingarm bearings(tapered roller). Yes it is right hand thread and needs to be removed to remove the swingarm.   Jramsey Posted on Monday, January 16, 2012 - 08:08 pm:        Here's the parts book breakdown, it doesn't show the left side threaded adjustment bolt. (Message edited by Jramsey on January 16, 2012)   Coffeerider Posted on Tuesday, January 17, 2012 - 12:43 pm:        Thanks, got it out without damaging anything. Really appreciate the help.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: