G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Hams Posted on Tuesday, October 25, 2011 - 08:57 am:        Anyone else had good luck with 17mm radial master cylinder? I believe the earlier tubers used 5/8 bore in mc which is approximately 16mm. So I tried to match it as close as I could with the new radial. Using on my 96 S1 resto.   X3rs Posted on Monday, January 23, 2012 - 01:11 pm:        At this time I am looking into a radial master for duel 6 pot fronts. Looking for less lever movement before the brakes activate. I did go to the earlier Buell master (don't remember what year but it was larger than my 2000 stocker)for the bigger bore, but still not enough fluid being moved. What brakes are you running that caused you to go to a radial?   Hams Posted on Thursday, February 16, 2012 - 11:41 pm:        Running stock PM set up. Went to radial mostly for looks, hopefully better feel (not as soft). Also the Stock master had clearence issues with the clip on set up I am using.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: