G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Joefirebolt Posted on Tuesday, July 26, 2011 - 04:43 pm:        Is anyone familiar with how to install a new voltage regulator? The new version has different connecting terminals than the old one. I'm a little perplexed.?. I don't want to snip any wires without being certain.   Froggy Posted on Tuesday, July 26, 2011 - 04:57 pm:        They changed the voltage regulator connector due to the old one being prone to failure. You should be able to remove the existing old connector and install the extra new connector the VR came with.   T9r Posted on Wednesday, August 10, 2011 - 09:18 am:        Here are the old XB style 77 connector (right), 2003/2004 It was around 2005 when the new VR 77 connectors came out, but you could also modify your previous VR units with this kit (Deutsch connector, 2 pin (14-16 gauge pin): Y1312.02A8 for about $20, Buell, Voltage regulator service kit to fix the connector 77 (voltage regulator) on all XB 2003-2007 From 2008-2010 both VR connectors changed.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: