| Author | Message | ||
     Jandj_davis |
I had my primary all apart this past winter to replace the shift shaft, shift shaft seal, and primary chain tension adjuster. Since then, I have had oil leaking out of my primary at the primary chain tension adjuster. It's not large quantities, but a drop or two a day, enough to make me mad. Do I just need to torque that nut a little tighter? I didn't see any seals or gaskets there in the primary cover when I had it off, and don't see any in the parts breakout either. | ||
| 5liter |
I believe there is a nylon seal built into the nut. Maybe yours is cracked just a bit. | ||
| Bluzm2 |
Did you put the adjuster nut on upside down? The nylon part that 5 mentioned above goes toward the case. |
