G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Electrical - Battery, Charg Sys, Lights, Switches, Sensors & Guages » Archive through April 21, 2013 » Garage Door Opener « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Terrys1980
Posted on Wednesday, July 13, 2011 - 05:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Well I decided to incorporate a garage door opener into the left hand controls and since I always ride with the hi-beam on there is no need for me to keep the hi-beam flash switch operable. The actual board for the garage door opener is external from the switch housing and tucked under the front fairing. The 3V battery is still powering the circuit board.

I started with a LiftMaster key fob that I purchased off of ebay.


Cut a small mutli-conductor phone cable I had laying around and soldered it to the board.


Then I used some heat shrink to cover and seal the board. The heat shrink I used is 7/8" high voltage type that has the adhesive on the inside.



Next I unsoldered the headlight wires and put some heat shrink on them to prevent them from shorting out. Then I soldered the wires coming from the circuit board to the switch.



There is a opening that looks like it would be used for something else that I routed the wire through.
Top of pagePrevious messageNext messageBottom of page Link to this message

Teeps
Posted on Thursday, July 14, 2011 - 12:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Good job.

However, it would have been easier to connect remote switch wires to the other end of the high beam switch wires.
Top of pagePrevious messageNext messageBottom of page Link to this message

Terrys1980
Posted on Friday, July 15, 2011 - 09:58 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I didn't really look at the option. It just seemed easier not to have to look at wiring schematics and trace out wires.
Top of pagePrevious messageNext messageBottom of page Link to this message

Saltyfirefighter
Posted on Sunday, September 09, 2012 - 07:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Terrys1980

I did this and it turned out bad ass. Way. Heaped than the $129 module HD wants to sell you w/ 2 hours of labor @ $100 per hour. I did this for < $30 and it looks & functions awesome. You da' man. Or woman maybe. Either way, thank you!!!

The Salty Firefighter
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration