|Posted on Friday, June 24, 2011 - 03:49 am: ||
Hello, looking to remap, have questions, or would just like this done.
message me or call Jim- 630.995.1798
|Posted on Saturday, July 20, 2013 - 07:10 pm: ||
Jim, I have a cable that I made from the instructions on the ECMSPY website. I have the latest version of Mono and the ECMSPY software. Have you managed to get your to work (if you had a working cable)? Or do you need a working cable to make your installation work. If you're still in need of it, maybe we can get together to help each other out. I need to get my TPS reset but my ECMSPY installation cannot get the info from the ECU despite the software knowing the cable is there and recognized. Let me know if you resolved your issue and if not, drop me a line xb12r_guy(at)yahoo.
|Posted on Sunday, September 15, 2013 - 11:10 pm: ||
Did you open ecm spy for mono as administrator? My windows vista works this way as I spent nearly a week fooling with laptop and wouldn't take resets, etc. Then read the paragraph that had that bit of info in it
. Good luck or better yet, hope you've allready got up and running.