G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Wolfo68 Posted on Thursday, June 16, 2011 - 04:02 pm:        so I had a fastener break while tightening a bolt, somehow I must have overtorqued it any ideas on how to get it out?   Buell_bert Posted on Thursday, June 16, 2011 - 05:43 pm:        Pull the cover and get a vice-grips on it or if close a small chisel and hammer and gently tap it out CCW. I know because I've done the same thing before. I even did it torquing them. Now I just snug them up and have not had a leak or broken one since.   Wolfo68 Posted on Saturday, June 18, 2011 - 01:39 am:        I used the vice grips and got it out   Buell_bert Posted on Saturday, June 18, 2011 - 11:36 pm:        WOW glad it was easy to get out.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: