G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Thumper74 Posted on Tuesday, March 22, 2011 - 03:58 pm:        I'm considering a Jardine aluminum can for my 2005 XB12, and I'm curious about the rivets tearing the aluminum. Is this a large issue with these exhausts?   Briz31 Posted on Thursday, October 11, 2012 - 08:29 pm:        1. Re-Pack with Silent Sport Premium (Get rid of the Fiberglass rubbish) 2. Seal it up and use Stainless Steel Rivets. Mine was good for 15,000km, no repacking required, gives it a very deep sound. You will need 2 bags of Silent Sport. 450 gram & a 300 gram. 1. Remove the chicken wire around jardine packing. leave the internal core. 2. layer silent sport, packing if down with a ruler, continue until you reach the end, pack it FIRM and leave about an inch movement at the end. Seal it up.. STAINLESS STEEL RIVET.. and she's good to go.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: