G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Texas_firebolt Posted on Wednesday, January 26, 2011 - 03:59 pm:        So ive got a 06 XB12X and its got an annoying stalling/stuttering issue. I havent messed with ECMspy before but think my issue is either in a bad sensor or i need to reset my tps. Checked for intake leaks and 99.9% sure that isnt it. New plugs. So my question is, can i still get ECMspy for free? I seen they had something about it not being free anymore.   Texas_firebolt Posted on Thursday, January 27, 2011 - 10:20 am:        Ok. Got ECMspy downloaded now. Thanks Terrys1980!! My next question is about the cable. What kind of USB cable will work? I read that a standard run of the mill USB wont work and i need a 232 TTL 5V cable. Where would i locate this locally(radio shack, frys electronics?) and what does it look like. Also i did look up instructions on ECMspy.com so i know about the rest of the conversion to the deutsch connector. Thanks guys   Terrys1980 Posted on Friday, January 28, 2011 - 11:10 am:        It is possible to fabricate your own cable but your best bet is to get it from one of the sponsors. http://www.americansportbike.com/shoponline/ccp0-p rodshow/A9317.html Here are the links to the individual parts. Plug Cable There is also a way to go wireless with it. http://www.buellxb.com/Buell-XB-Forum/Do-It-Yourse lf-Buell-Mods/How-To-Build-your-own-Wireless-ECMSp y-cable (Message edited by terrys1980 on January 28, 2011)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: