Author |
Message |
Thundermutt
| Posted on Wednesday, December 01, 2010 - 02:31 pm: |
|
looking for the easy way out.like some of the other guys went to take off in first from a light and the bike would not go into gear.So i pulled the primary cover off and the clutch out to replace the main crank seal and found part of the adjuster shoe in the bottom of the case.Should i pull the tranny and check for backed out pins or put it all back together and see if it was the part of the shoe. It shifts fine in all other gears. its in a 97 s-1 let me know what some of you pros think |
|