|Posted on Wednesday, September 22, 2010 - 12:06 pm: ||
Anyone done it?
Want double high and double low beam setup, but don't want HID.
|Posted on Saturday, October 09, 2010 - 08:56 pm: ||
I just did the Sportiva kit:
http://cgi.ebay.com/ebaymotors/08-09-Buell-Ulysses -XB12X-HID-Xenon-SLIM-Motorcycle-Kit-_W0QQcmdZView ItemQQhashZitem1c13c1186cQQitemZ120590506092QQptZM otorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
...and outside of their "no cutting plug and play" bs I think it worked out great. I also did the plug wire switch so I have both beams on when in high. I also wrapped the ballasts in foam due to the lack of a good mounting point. I think that the foam should dampen vibration and keep the balasts from any impacts/vibrations inside the flyscreen.
|Posted on Wednesday, February 23, 2011 - 09:51 am: ||
Augustus, it's been several months since you posted this. How is the Sportiva kit holding up? I just started shopping for a HID kit and came across your post. I'll be installing on an '09 XB12XT. Would like to hear your comments. The $55 price seems low compared to others.