G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Dons_xb9r Posted on Tuesday, August 03, 2010 - 09:26 pm:        hello iam ready for new brakes on my xb9r is it hard to do?????? do i need to take off the caliper????? if so what size is the hex head please help me Donald seagraves   Terrys1980 Posted on Tuesday, August 03, 2010 - 09:53 pm:        Its not hard at all. Just center the caliper between two spokes. Loosen the pin but do not remove. Loosen top bolt and remove bottom bolt. You will need a 5/16" for the caliper bolts and 3/16" for the pin. I put masking tape on the spokes and around the hub to prevent chipping the finish. When installing torque bolts to 35-37 ft-lbs and pin to 11-15 ft-lbs. (Message edited by terrys1980 on August 03, 2010)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: