G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Xb12srider Posted on Tuesday, March 02, 2010 - 09:08 pm:        I was wondering if someone could help me with the removal of my header? last summer i dumped the bike and its scratched up and worn off so i wanted to take it off and weld it up but now that i started looking at removing it there seemed to be some issues with getting the one back nut off thats by the sensor...If someone could give me some tips on how to get it off id greatly appreciate it, thanks   Husky Posted on Wednesday, March 03, 2010 - 01:04 pm:        Never done it myself, but the Service Manual says to rotate the engine down, then remove the oxygen sensor, and the header mounting fasteners. You should buy or barrow the manual. husky   Pash Posted on Monday, March 08, 2010 - 02:09 am:        Try this: http://www.ukbeg.com/forum/viewtopic.php?f=17&t=42 0

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: