| Author | Message | ||
     Wtst91 |
does anyone know what kind of relay or resistor i would need for led turn signals front and rear? I started out with my factory relay but all it did was the lights came on and the relay buzzed. so i went to eBay found a universal one that was made for led lights (looked exactly the same as what was on my bike but had a smaller wattage stamped on it). But all it did was nothing tried reversing the wires on my lights still didn't help no noise nothing. Any help would be appreciated | ||
| Xb12mel |
http://www.badweatherbikers.com/buell/messages/384 2/449339.html?1240861153 Yeah, you can get a resistor from Radio Shack. you need one for each side. I'm running 4 way LED turns with just two of these resistors. Cost me $5 (minus the solder) | ||
| Joe_deasy |
Anybody have info on the new stock 2010 LED turn signal lights ? I think the stock 2010 lights are a huge (stock) upgrade. The LED tail light is nice, but the new turn signals are way better than the my 2009 blinkers. I'm thinking about swapping all my lights for the stock 2010 version, and then wire them up with a brake light modulator like this: https://www.kisantech.com/index.php?cat_id=4 or this: http://store.valueaccessories.net/tri-starxpturnsi gnaltobrakelightconversionmoduleincludesdual-loade qualizer.aspx Anybody have any experience with those mods? Ever seen them in action? ~ |
