G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Kalali Posted on Tuesday, December 15, 2009 - 12:31 pm:        Can the LED blinkers be mixed with the OEM, e.g, LED in the rear and the OEM in the front? Question applies to both scenarios: with and without using the upgraded flasher relay to correct the blinking rate. Thanks.   Al_lighton Posted on Wednesday, December 16, 2009 - 09:41 am:        not a problem..but since they are wired in parallel, you'll probably get fast flash rate with LEDs at either end, and no flash with LEDs at both ends, if you don't have a suitable flasher or resistor mods. Al   Kalali Posted on Thursday, December 17, 2009 - 01:25 pm:        Thanks Al. So what will the relay do to the flashing rate of the non-LED set if I use LED in front and stockers in the back? And how much faster is the blinking rate if I use LED just on one end w/o the relay? Twice as fast as the stockers?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: