G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Troubleshooting (Poor Starting/Running/Handling/Ride Issues) » Archive through August 24, 2009 » P3 fuel enrichment plugged? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Coolcruiser
Posted on Monday, July 06, 2009 - 07:22 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)
Just bought an '02 Blast that had been sitting for a awhile. It doesn't start without a manual squirt of gas in the carb so I pulled the carb to clean the cobwebs and rejet, While it was apart I checked the fuel enricher and it functions fine (12v to a cold unit causes the needle to extend out). It seems the enrichment circuit may be plugged inside the carb. The fuel circuit is cast into the carb. There is a little plug that would need to be drilled out to allow me to probe the circuit. It would have to be replugged with epoxy or solder. Has anyone done this? TIA
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration