| Author |
Message |
    
Loki
| | Posted on Wednesday, June 24, 2009 - 09:56 pm: | 
|
Here it goes. Will post a copy of the run sheet later.
What was done....
-1250 kit with iron lined cyls
-XB heads with a Stage 2 lite
-Stock 97 S1 cams (15-x)
-Mikuni HRS42
-early SuperTrapp race header w/early Trapp muffler
-Buell race ignition module
-Buell race air cleaner (cf Ham Can)
-Stock rockers
-Stock lifters(updated bores to later retention pins)
-Shortened push rods (due to machining/xb heads)
Bottom end is stock for 97.
Now for the good stuff.
DynoJet Dyno doing a Roll On(5th gear). 88 degrees, 29.53 in-Hg, Humidity was 26%, SAE correction of 1.01
The results......
The HP came in at a measly 'ol 100.57
The torque hit 87 ft-lbs and flat from 3500 to the rev limiter.
The a/f line is flat and smooth. |
|
»
97 S1