G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Troubleshooting (Poor Starting/Running/Handling/Ride Issues) » Archive through August 24, 2009 » M2 Puking oil at mid-rpm « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Unsettledparadox
Posted on Saturday, June 20, 2009 - 03:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

my buddy just bought a '00 M2 and its puking oil out of the breather at mid-high rpm. not just a little, it will empty the oil bag onto the ground through the breather vents.

the motor has 40k on it and runs really well. pulled the rocker covers and saw the umbrella seals were on in the wrong spot. swapped them and it was better. thought the oil pump might not be scavenging. took the pump apart, all looks well inside. swapped the oil pump for a known good one from an S1 and even with that pump it dumps oil.

its fine at idle but anything above that and oil hits the floor. does anyone have any ideas?
Top of pagePrevious messageNext messageBottom of page Link to this message

Sparky
Posted on Saturday, June 20, 2009 - 07:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Does it return oil to the oil tank at all with the motor running?

If not, try blowing air through the oil lines to see if any are obstructed.
Top of pagePrevious messageNext messageBottom of page Link to this message

Unsettledparadox
Posted on Saturday, June 20, 2009 - 09:09 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

the oil ends up in the motor and doesnt return to the bag

ill have him trying blowing out the lines
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration