G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Sportymark Posted on Friday, May 22, 2009 - 09:29 am:        What size Hex do I need to remove the cap screw in the bottom on the fork (the one sealed with crush washers) I knwo it has to be long but not suer of the size.   Easy_rider Posted on Saturday, May 30, 2009 - 05:25 pm:        I'm fighting that myself right now. A 5mm fits it best. Mine is frozen. It's a long reach down, a socket is too big to clear the access hole, and the one 5mm I can find right now barely reaches. Good luck with yours!   Easy_rider Posted on Saturday, May 30, 2009 - 05:29 pm:        Are you replacing the item referred to as a "support ring"? The service manual says to replace it. Dealer gave me a quote of ~$45 each!!! It's a metal washer - I don't see the point!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: