G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Troubleshooting (Poor Starting/Running/Handling/Ride Issues) » Archive through June 03, 2009 » Updated ecm swap ?

« Previous Next »

Author Message   Bushpig Posted on Thursday, April 23, 2009 - 04:40 am:        Has anybody considered fitting an 09 ecm into pre 08 buells... is it a simple plug and go or have the connectors been changed ?   Akbuell Posted on Thursday, April 23, 2009 - 10:02 am:        I believe the short answer is No. The '08-'09 ECMs get their timing info for the ignition and fuel injectors from the crankshaft. The '07 and earlier ECMs get their timing info from a camshaft sensor, which runs at 1/2 crank speed.   Bushpig Posted on Friday, April 24, 2009 - 05:39 am:        That was obvious , I was so keen on the idea I forgot about the pickups thanks for the reminder .

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: