| Author |
Message |
    
Kalali
| | Posted on Monday, March 23, 2009 - 07:17 pm: | 
|
I have this old habit of blipping the throttle when downshifting and my X1 seems to bog a little when I twist the throttle real fast. This happens even with warm motor. Just for comparison I rode my friend's Jap bike and the throttle response is instantaneous.
Is this just a normal trait for an FI Tuber? I have tweaked the fuel maps using the ECMSPY, e.g., smoothed out the cell values, etc.
Thanks. |
Jramsey
| | Posted on Tuesday, March 24, 2009 - 02:46 pm: |
|
I have the same habit, mine comes from riding two strokes for forty years.
My X1 spits a little off idle about half the time, Its stock other than exhaust and air filter.
My S3 has a race ecm,exhaust and air cleaner, has very crisp throttle response, runs excellent and never spits, pops or bogs.
I would assume that the stumble could be worked out with a tps reset/EcmSpy,haven't used it yet myself because I'm a pc dummy.
I have the program and cable but no lap top yet. |
Kalali
| | Posted on Wednesday, March 25, 2009 - 08:17 am: |
|
Thanks. So it sounds like it can be improved. I do have the Race map in my ECM and it helped with the V&H and high flow filter. Now I need to look in the timing maps via ECMSPY 'cause I think that's where I can improve the off-idle response. |
|
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through April 15, 2009 »
Throttle Response; '00 X1