G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Tobycat1 Posted on Monday, December 15, 2008 - 04:35 am:        Hi Guys, Earlier today I did a TPS reset on my XB12R using Ecmspy I had removed the airbox and base including unplugging the IAT sensor to check the idle cable as well.TPS reset went fine however while playing on my laptop tonight and checking my Eeprom data the following trouble code was present trouble code 15 Air intake sensor shorted to supply voltage or open.Now thinking back the IAT sensor was disconnected at the time I was using Ecmspy would this be the cause of the trouble code? I reconnected again to the bike using Ecmspy with everything put back and there were no codes?.So what I mean is could this trouble code occur because the the IAT sensor is unplugged? Many thanks and Merry Xmas Regards Tobycat   Brakes2late Posted on Monday, December 15, 2008 - 11:36 am:        The bike is watching you......it knows your every move. Be afraid, be very afraid! and yes, you would get that error...

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: