G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Engine » Fuel System: EFI/DDFI, Carb., Filter, Pump, Tank, Filler-Cap, Fuel » Archive through January 26, 2009 » Injector question « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Caféelite
Posted on Thursday, November 06, 2008 - 04:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Bike: 06 XB9 CityX

My issue is that my bike is running kinda boggy. Up to 3500rpm you cannot tell all that much but after 3500rpm if you get on the throttle its just boggy. Its like you can hear it want to go but there is no power. Sorry for the lack of technical detail on this.

So I hooked up ECMSpy (im still dumb w/ this product) to see if I could find anything. First thing first is that its not kicking out any errors.

I reset the TPS and AFV. I went out on the bike and for 2-3 miles in the 2-4k range. The first time I did this the bike snapped right up and ran great for like 4 days but then back to the same issue. Since then I have tried to reset the TPS and AFV w/ no luck.

On the tab that shows injectors pulse I noticed that my rear injector is consistedntly x.2x behind the front injector. My friends XB12 was consistent. Is this normal?

Thanks,

Jesse
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration