G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Scobbie001 Posted on Saturday, October 18, 2008 - 03:14 pm:        So, I got my cable, installed the driver, my device manager says it is under COM5, so I set ECMSpy to COM5. I get nothing, no error messages, nothing. And yes the bike is switched on. Any ideas?   Froggy Posted on Sunday, October 19, 2008 - 12:08 am:        Use the auto detect, make sure key is on and kill switch is set to run.   Scobbie001 Posted on Sunday, October 19, 2008 - 12:12 am:        Did all of that...the device manager has another driver set for my cable and won't let me change it...but everything else is right as far as I can tell   Brakes2late Posted on Monday, October 20, 2008 - 09:07 pm:        You may need to disconnect from that com port in your device manager and then let ecmspy autoconnect again.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: