G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Troubleshooting (Poor Starting/Running/Handling/Ride Issues) » Archive through September 10, 2008 » Timing issues, do I need a new cam sensor? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Posted on Thursday, August 14, 2008 - 06:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Bike would backfire and only run fair for about 15 miles.

Checked the timing (was retarded) and set it according to EcmSpy instructions. Tried various maps, datalogging, and the idle would drop 2-3k every 10 seconds or so. 3.8-5k it ran rich. Tried two ECMs with the same results.

Now, I can only get bike to idle with TPS @ 7%, and runs crappy (rich) from 4-5k rpm.

So I checked the timing again, and now the injectors only kick on when the line is to the left of the inspection port. I can't get it into a position where I can adjust the cam sensor. What gives?
« Previous Next »

Add Your Message Here
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration