G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Firemanjim Posted on Wednesday, August 06, 2008 - 07:30 pm:        working on the S-1 and the shift drum pins are out,can these be driven back in too far and if so how far in do I want them. My spare trans has some out too. My manual is at home.And the S-1 manual in the KV does not come up here at work,only an intro.   Spiderman Posted on Thursday, August 07, 2008 - 12:42 pm:        You are talking about the pins for the sifter forks correct? If so just drive em in, they will stop at a pre machined depth...   Firemanjim Posted on Thursday, August 07, 2008 - 04:10 pm:        Thanks Tony,thats what I needed to know. Hey ping me your e-mail again as I have some stuff I found for you while cleaning attic/barn out last week.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: