G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Zoedogg1 Posted on Friday, July 18, 2008 - 12:51 pm:        I changed out my rear caliper on my 04XB12R due to some striped threads, and put new Ferodo pads in. I have noticed that the pads are wearing uneven. The pads against the piston seems to be thinner in running them for the last few weeks. I replaced my rotor also and have noticed that the same pad is not wearing the rotor near as smooth as the other side. I checked again to confirm the pads are seated correct and the brakes have been bleed very well with the MityVac. Should I be very concerned. I do have some new OEM pads I could put in place of them. What do you guys think?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: