G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Kurbennett Posted on Thursday, June 26, 2008 - 10:49 pm:        Trying to replace the two bolts that hold the upper fender or beak to the forks. I added a 1/4" flat bar for auxilliary lights and need bolts a little longer. I need the size if anyone knows it.   Kilroy Posted on Friday, June 27, 2008 - 05:51 am:        Can't you just take the old ones to Ace and match the threads, and just get some that are 1/4" longer? I have found this sometimes to be an easier procedure than trying to get obscure info, but then again I am usually too lazy to look things up and it gives me another reason to ride.   Bigdaddy Posted on Friday, June 27, 2008 - 08:15 am:        Good advice, IMHO, from Kilroy. Take one of the old ones to a automotive parts store (I know for sure that Autozone has them) and they have what you're looking for.   Kurbennett Posted on Friday, June 27, 2008 - 11:22 am:        Thanks All, Will give it a try..

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: