| Author | Message | ||
     Tblasier_mmi |
    Alright so my belt kept backing off whenever i would push my 2006 Scg backwards. Had no clue what the problem was. i replace the rear sprocket, and wheel bearing and it still did it. so there was only one other thing that would make it do that. the Swingarm Pivot Shaft. Look at this thing. the shaft is completely broken in half. It took my 5 hours and two different slid hammers, sweat, and swearing. but i finally got it out. Once i removed the jammed shaft i found out that the threads were broken off in the back of the primary case. So then my roommate took a small chisel sideways and turned it with a pipe wrench and surprisingly it came out like nothing. Thats a hell of a lot better the cutting my swingarm off just to get that damn shaft out. | ||
| Ben782 |
Definitely was a fun and interesting time getting that out. You should post this in the chassis/swingarm section. |
