| Author |
Message |
    
Scottykrein
| | Posted on Monday, June 16, 2008 - 06:55 pm: | 
|
So this weekend I installed the Iridium plugs, changed the air filter, and put two 1 inch holes in the air box. When all was finished the idle was a little high, so I backed it down to 1050. On the ride home the idle was stuck at 2500, but it would drop back to normal after a minute. This morning it idled fine until about 10 minutes into my commute the idle would stick around 1700. It doesn't happen all the time while riding. So other than the occasional high idle there's no problems. No coughing or popping. So did I not hook a hose up correctly? Could it be the exhaust valve sticking? Or do I just need a TPS reset? |
Jont
| | Posted on Tuesday, June 17, 2008 - 01:52 am: |
|
Check your intake seals for leaks. |
Boscoe
| | Posted on Friday, June 27, 2008 - 01:49 am: |
|
Could also be throttle cable, make sure it's routed correctly and nothing is kinking it. |
Guzzi4god
| | Posted on Sunday, August 10, 2008 - 09:37 pm: |
|
new 08 xb12xt any issues to lookout for ? fuel /bearings, elect. ect. love the bike.but some reports bother me.thanks for any encouragement. richard. |
|
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through September 10, 2008 »
06 Uly Idle issues